Oricom Radio & Dual Antenna Value Pack - UHF CB Radio UHF182X + 6.5dBi ANU800 & 3dBi ANU850 Antennas
This is a new quality Oricom branded UHF CB Radio Value Pack.
Another amazing innovation from Oricom – This bundle pack includes the UHF182X Dual Antenna UHF CB Radio + TWO BONUS Antennas! (ANU800 + ANU850). Whether you’re in the high country, in rough terrain or on the flat, Oricom’s Smart Dual Antenna Technology ensures you receive the strongest signal automatically. This antenna pack come with a 6.5dBi and a 3dBi antenna making communication easy. The reverse side of the transceiver features dual antenna inputs, offering the best communication solution for whatever terrain you find yourself in.
Features & Benefits:
UHF182X UHF CB Radio Key Features:
- Integrated (DAS) Dual Antenna System
- Heavy duty controller speaker microphone
- 80 channels
- Open/priority and memory scanning
- 5 Memory channels
- Over/under voltage alert function
- 38 CTCSS and 104 DCS codes
- 3 colour backlit display (2 levels of brightness)
- Audio scrambler
- Tri-watch
- Automatic power off
- Duplex (range extender)
- Volume, channel and squelch control
- 3.5mm external speaker jack
- Designed, engineered and made in Korea
ANU800 6.5dBi Antenna Key Features:
- Heavy duty barrel spring base
- Detachable pole
- Antenna length of 1143mm (including spring base)
- 4.5m Low-loss coaxial cable, a pre-terminated FME connector and PL259 adaptor
ANU850 3dBi Antenna Key Features:
- Heavy duty barrel spring base
- Non-detachable pole
- Antenna length of 660mm (including spring base)
- 4.5m Low-loss coaxial cable, a pre-terminated FME connector and PL259 adaptor
Warranty:
Antennas - 3 Year Warranty
Frequently Asked Questions
I am transmitting on my radio and the other party can’t hear me?
If you are using channels 1 to 8 or 41 to 48 you could be transmitting in Duplex mode, turn DPX off or move to another channel.
What is CTCSS?
CTCSS, or Continuous Tone Coded Squelching System, is an option that allows your UHF radio(s) to only pick up radio signals preceded by a “code”. This option helps to cut down on unwanted radio chatter. This is also known as PL, Private Line, Channel Guard, etc.
If the UHF Radio does not switch on at all?
Check the power lead (wire harness) and fuse.
What is the range of the UHF radio?
The type of antenna you use and where it is mounted on your vehicle will affect the range. A Low gain antenna will give you less range but wider coverage. A high gain antenna will give you greater range but it produces a narrower field which is more directional. Mounting the antenna low on the vehicle will shield the transmission in the directions close to the vehicle, so ideally the antenna needs to be mounted as high as possible.
How far does a UHF radio transmit?
Many factors affect how far a UHF radio will transmit including power of the radio and the environment in which it’s used (e.g. buildings, mountainous and surrounding vegetation can cause range problems).
What is a Repeater?
A Repeater is a Radio Relay Station. It is used when the radio signal needs to be magnified to get the desired distance coverage. It works by receiving a radio signal from one unit, magnifying it and retransmitting the signal to another radio unit. It would be used in an area where coverage was hindered by terrain, buildings or other environmental conditions.
Where are the repeater stations located?
There is a list of repeater stations across Australia. This list and the operational status of the repeaters can change so please check with the ACMA for the latest information on repeaters.
Is this radio suitable for use outside of Australia & NZ?
All Oricom products are approved for use in Australia and NZ only, and although they will still work in other countries, they may not meet that countries requirement’s for voltage, operating frequencies or power RF levels and if used may interfere with other services which could attract penalties from the local administration authorities.
Specifications:
UHF182X Technical Specification
| Compliance | AS/NZS 4365:2011 |
| Frequency Range TX/RX | 476.425 - 477.4125 MHz |
| Number of TX/RX Channels | 80 UHF CB |
| Channel Spacing TX/RX | 12.5KHz |
| Operating modes | Simplex, Repeater TX offset (+750KHz) |
| Scanning Speed | 130mS per channel |
| Antenna Impedance | 50 Ohms for ANT1, ANT2 |
| Operating Volts nominal | 13.8VDC |
| Operating Volts Range | 10 to 15VDC |
| Over Voltage Protection | Diode and Voltage regulator system |
| Over Current Protection | 2 AMP fuse |
| Reverse Polarity Protection | Shunt diode |
| Frequency stability | +/- 5 ppm |
Click Here to View Specifications
Click Here to View Quick Start Guide
Click Here to View User Guide
Click Here to View Fitting Guide
ITEM SPECIFICS
| Brand: | Oricom |
| Manufacturer Part Number: | UHF182XSB8 |
| Our Part Number: | NGUHF182XSB8 |
| Cross-Reference Numbers: | UHF182X, ANU800, ANU850 |
| Condition: | New |
Ask a question about this item
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.