Engine Saver Sensor suitable for Discovery 200Tdi 300Tdi ESSLR2
Engine Saver Sensor Land Rover Discovery Defender 200Tdi 300Tdi and V8, ESSLR2
Engine Saver Sensor Land Rover Discovery Defender 200Tdi 300Tdi and V8. An Engine Saver® is a device which monitors the coolant level in an engine. Low coolant alarms are fitted to very few engines as standard equipment by manufacturers. When the coolant level drops due to a split hose, a stone through the radiator, a faulty pump seal or simply because the radiator cap wasn't replaced properly, this device is designed to help warn you before any engine damage is done. Over 70% of major engine blow-ups are caused by coolant loss going un-detected. In fact the normal temperature gauge will DROP in cases of sudden coolant loss as the sensor in the cylinder head NEEDS COOLANT AROUND IT TO WORK PROPERLY. Engine Saver® systems use a screw in sensor probe which replaces the existing blanking plugs in the cooling system. Fitting the sensor is very simple - no drilling or cutting holes. Kit includes a screw in sensor to replace the plug in the top of the radiator or radiator hose, an electronic cabin module with audible alarm and LED warning light, snap in bezel with surround sticker for cabin module, pre-made connector cable from the module to the sensor, cable ties and full installation instructions. An Engine Saver® can be fitted to any engine by a mechanic, auto electrician or home handyman in less than an hour using normal hand tools.
ITEM SPECIFICS
| Brand: | Land Rover |
| Manufacturer Part Number: | ESSLR2 |
| Our Part Number: | NGESSLR2 |
| Condition: | New |
ADDITIONAL INFORMATION
- All Four x 4 Spares are an independent supplier of aftermarket, original equipment, and genuine parts. We are in no way related to genuine or original part manufacturers, distributors, or dealers. The warranty of any OEM genuine part is solely provided by All Four x 4 Spares
All Four x 4 Spares will always undertake to provide adequate packaging to prevent damage to products during shipping. Our responsibility for any damage to freight ends when order has left our premises. We will consider replacement of damaged product however judgement will be at our discretion. If damage has occurred during shipping it would be advised to notify us and relevant courier.
- All exchanges / credits / refunds must be returned in saleable condition with packaging, accompanied by the original invoice for proof of purchase.
- All USED mechanical parts sold carry a 3 Month parts only warranty unless otherwise specified.
- All NEW mechanical parts sold carry a 12 Month / Unlimited kilometre parts only warranty unless otherwise specified.
- All electrical parts or components sold carry a 30 Day parts only warranty unless otherwise specified.
- All Four x 4 Warranty does not cover - Labour expenses, freight or towing costs, oil leaks, broken gears, consequential damage, loss of income or any other loss or expense.
- All Four x 4 will not be liable for any repairs or work carried out, without prior approval from All Four x 4.
- Warranty is void if parts have been tampered with, modified or dismantled.
- Goods cannot be returned if they have been specially ordered or vehicle cut section.
- Goods not required must be returned within 14 Days of invoice date at purchaser’s expense. Goods will be accepted only at the Management’s discretion. If accepted for return, such goods will be subject to a 15% handling charge.
- Good will not be accepted for return if they have been fitted, unless proven faulty.
- Warranty is void for components used in performance / modified vehicles or parts / competition / off road / race applications.
- All fitment information is for vehicles released in Australia, unless specified otherwise.